CSII

Desks

Nominal Dimensions

Desk bases constructed of cold rolled steel. Structural components are made from 14 Ga. with exterior surfaces made from 18 or 22 Ga. steel.

All desks, credenzas, returns, and "P" tables are available with storage pedestals incorporated into table base to reduce redundant components.

All desks, credenzas, and returns are non-handed.

Modesty panels full height on all desks, except credenzas and ‘J’ tables which offer 2/3 height modesty panels.

Bridges offer three modesty panel options: full height, 2/3 height, or no modesty panel.

All desks come with standard leveling glides and grommets.

Legs and Modesty panels are made from Cold Rolled Steel.

Structural leg components are manufactured with 14 and 18 gauge CRS; modesty panels manufactured with 22 gauge CRS.

Worksurfaces

Worksurfaces High Pressure Laminate face with PVC edging covered on bottom with backer sheet to prevent warping; core is 1 1/8" thick 45-lb. density particleboard.

Worksurfaces support optional under-counter keyboard storage.

Worksurfaces have standard wire management grommets and are provided with cable routing clamps, which are to be field installed.

Pedestals

Nominal Dimensions: Height 28" – Width 14.8" – Depth 23" and 29.3".

Cabinets are of a welded shell for maximum structural integrity.

Pedestals are non-handed and can be attached to desks, returns, and "J" tables in place of legs.

Pedestals feature full extension ball bearing slides on all drawers, with adjustable leveling glides, pencil tray and box/file divider.

Locks are standard and allow for the lock cores to be changed to key entire suites alike.

All drawers units are equipped with an integral locking device to prevent more than one drawer from being opened at one time.

Overhead Storage

Nominal Dimensions: Height of 36"; Depth of 15"; Widths of 48", 54", 60", 66" and 72".

Shelf depth is 13 7/8".

Worksurface to bottom of shelf clearance is 20"H.

Cabinet body and Door are constructed of Cold Rolled Steel. Structural components are of 18 Ga. with exterior surfaces made from 22 Ga. steel.

Door shall swing up and over the body to optimize interior space using ball bearing slides.

Locks are standard and allow for the lock cores to be changed to key entire suites alike.

Soft close assist, tack panel, and task light options available.

Lateral Files

Nominal Dimensions: Height 28" – Width 30" and 36" – Depth 20".

Cabinets are of a welded shell for maximum structural integrity.

Lateral files and Personal Filing Centers have an integrated cap that allows the files to be used as a freestanding file. They also slide easily under credenzas and returns for optimal filing efficiency.

File feature full extension ball bearing slides on all drawers, with adjustable leveling glides.

Locks are standard and allow for the lock cores to be changed to key entire suites alike.

All drawer units are equipped with an integral locking device to prevent more than one drawer from being opened at one time.

Privacy Panels

Nominal Dimensions: Heights of 9" and 18" can be stacked to create panels of 18", 27’ and 36" H.
Widths of 24", 30", 33", 36", 42", and 48". Depth of 1 1/4".

Privacy panels are field installed and secured directly to the top and side of the worksurface for maximum stability and vertical rigidity.

Finishing kits are available for ganging panels together to create custom combinations. Finishing kits consists of PVC (trim strips and ABS trim caps.

Dry Erase Privacy Panels

Construction:Frame is 1.000" ParticleBoard
Skins are Wilsonart Dry Erase Laminate
Core is 1.000" Kraft Honeycomb, 1/2" cell, phenolic impregnated, 2.76 pounds per cubic foot density, made of recycled paper. Available in white only.

Dry Erase Laminate Composition:Marker Board Laminate is constructed from decorative surface papers that are impregnated with melamine resins and pressed over kraft paper core sheets impregnated with phenolic resin. The melamine resin facilitates liquid chalk removal. Sheets are then bonded at pressures greater than 1000 pounds per square inch and at temperatures approaching 300° F (149° C). Finished sheets are trimmed and the backs sanded to facilitate bonding.

Colors: 1573, Frosty White ONLY
No other patterns or colors are available as Wilsonart® Marker Board Laminate.

Finishes: #9 Gloss ONLY
A smooth, gloss finish that facilitates easy removal of dry erase markers.
Glossometer reading: MD and CD 100 ± 10.

Tackable Fabric Privacy Panels

Construction: Frame is 0.375" MDF (Medium Density Fiberboard)
Skins are Micore 300, which are 50% lighter than particleboard. Consists of inorganic mineral fibers that resist moisture, minimizing expansion and warpage.

Core is 0.375" Kraft Honeycomb, 1/2" cell, phenolic impregnated, 2.76 pounds per cubic foot density, made of recycled paper.

Acoustical Performance

Thickness 3/8
STC Rating 24
NRC .25

Fabric

All Mayline corporate fabrics are 100% Recycled Polyester and meet or exceed Flammability - ASTM E-84- Class 1 or A. For additional information please see individual fabric specs below.